Three Tips To Help You Successfully Install A Gas Line

Many homes rely on natural gas or other gases to provide the power needed to run a water heater or other plumbing appliances. Running a new gas line into your home can be challenging, since any mistakes could leave your home susceptible to dangerous gas leaks.

If you are planning to install a new gas line in the near future, here are three tips that you can use to ensure the safety and success of your project.

1. Turn off the gas supply coming into your home.

If your home already has a gas lines running into it, then you need to take the time to shut off the main valve supplying gas to your home before you begin to work on the installation of a new gas line.

Many homeowners want to jump right in when it comes to installation, and they forget that tying in a new gas line means opening up a gas line that could contain dangerous gases. By shutting off your main gas valve prior to installation, you will avoid exposing yourself to harmful gases while you work.

2. Make sure you are using black pipe.

The type of pipe that you use when installing a gas line is critical when it comes to ensuring the safety of the gas line in the future. Most areas require that gas lines be made from black pipe.

Black pipe is constructed as one continuous tube, which eliminates the potential for hairline cracks or fractures that could allow gas to leak into your home. Black pipe can also be installed using heat fusion or mechanical fittings to ensure an airtight seal. Be sure that you are using black pipe that is designed for carrying gas when you add a gas line to your home.

3. Check for leaks once your gas line is installed.

Before you can complete the installation of your new gas line, you need to check for leaks. These leaks typically appear in areas where fittings are required to attach lengths of new pipe to your existing gas lines.

Dilute some liquid dish soap in water, then spread the mixture across the connection points in your new gas line. Turn on your home's gas supply at the main valve, then check the connection points for signs of bubbling. Any bubbles that form are signs of leaking gas. You should turn the gas supply back off, reseal the connection points, and check for leaks again until no signs of a gas leak are present.

Installing a new gas line in your home can make it easy to power a new plumbing fixture, but only if the installation is done properly. Be sure that you cut the supply of gas to your home before you begin working, use only black pipe, and test your new gas line for leaks before calling your installation a success. For more information, contact local professionals like Poremski Michael F Plumbing & Heating Inc.

About Me

what goes into adding a bathroom to your home?

Having a house that only has two bathrooms and three teenage girls reached a point where I thought I was going to lose my mind. In all seriousness, I thought I was going to go crazy listening to the girls battle over whose turn it was to shower or who used whose makeup. After several months of dealing with the insanity every single day, I finally talked my husband into hiring a plumber to run the plumbing we needed to install a third bathroom. Adding a bathroom was a lot of work, but it was worth it. Our blog will help you understand what goes into adding a bathroom to your home.